For consumer site please visit www.MetalEarth.com

Mars Rover Perseverance & Ingenuity Helicopter

MMS465
4.5 Sheets
Perseverance launched July 30, 2020, enroute to Jezero Crater, Mars. Perseverance features a plutonium power source and a variety of instruments to aid the rover in its mission to seek signs of previous life on Mars, as well as collect data to further aid future manned missions there.

Ingenuity, the 4 pound helicopter that was launched with Perseverance, features four specially made carbon-fiber blades, arranged into two rotors that spin in opposite directions at around 2,400 rpm – many times faster than a helicopter on Earth. It is a separate experiment from the rover and is intended to demonstrate technologies needed for flying in the Martian atmosphere.

Black Hawk®

MMS461
2 Sheets
Sikorsky® UH-60 Black Hawk® Since being introduced to the Army in 1979 this medium-lift, multi-role helicopter is now used in more than 28 countries world-wide. It has fought its way in and out of countless combat zones to deliver and extract troops, save lives, provide critical supplies and perform as an aerial firefighter and border patroller.

F-14 Tomcat™

MMS458
3 Sheets
The supersonic F-14 Tomcat is a twin-engine, variable-sweep wing fighter aircraft. It was developed for the US Navy to counter Soviet MiG Fighter jets. The Tomcat is a two person crew consisting of a pilot in the front seat and a Radar Intercept Officer (RIO) in the back seat.

Knight Bus™

MMS464
3 Sheets

Space Shuttle Launch Kit

ICX227
3 Sheets
Over 15 stories tall, the external tank flanked by two booster rockets, enabled the space shuttle to escape Earth’s gravity and send it into orbit. The two booster rockets would burn 9 tons of fuel per second, at a velocity of 3000 miles per hour.

Shuttle nameplates included:
Atlantis, Discovery, Endeavor and Enterprise.

C-3PO™

ICX229
2.25 Sheets

S-64 Skycrane™

ICX211
2 Sheets
Capable of carrying over 20,000 lbs., the Sikorsky Skycrane is one of the strongest heavy-lifting helicopters in the world. A firefighting workhorse, the Skycrane can also be fitted to hold 2,650 gallons of water – which it can refill with its hydraulic snorkel system in 45 seconds!

S-97 Raider®

MMS460
2 Sheets
The fastest next-generation helicopter in the world, the Sikorsky® S-97 Raider® features twin four-blade contra-rotating main rotors and a rear pusher propeller, allowing for a top speed of 276 MPH. What makes the Raider even more unique is its ability to turn its rear propeller on and off for ''Whisper Mode'', allowing it to sneak up on targets.

Razor Crest™

ICX217
2.625 Sheets
Build your very own Razor Crest™ Metal Earth® Premium Series model inspired from The Mandalorian™ series! Each Premium Series kit is made from high quality steel sheets and features amazing detail. Easy to follow instructions are included in each kit and no glue or solder required! Simply snip out the pieces and bend the tabs through corresponding connection points.

IG-11™

ICX213
3.5 Sheets
Build your very own IG-11™ Metal Earth® Premium Series model inspired from The Mandalorian™ series! Each Premium Series kit is made from high quality steel sheets and features amazing detail. Easy to follow instructions are included in each kit and no glue or solder required! Simply snip out the pieces and bend the tabs through corresponding connection points.

The Mandalorian™

ICX146
3 Sheets
Build your very own Metal Earth® Premium Series model of The Mandalorian™! Each Premium Series kit is made from high quality steel sheets and features amazing detail. Easy to follow instructions are included in each kit and no glue or solder required! Simply snip out the pieces and bend the tabs through corresponding connection points.

F/A-18 Super Hornet™

MMS459
3 Sheets
The F/A-18 Block III Super Hornet is the newest highly capable, affordable and available tactical aircraft in U.S. Navy inventory. The Super Hornet is the backbone of the U.S. Navy carrier air wing now and for decades to come.

Buckbeak

MMS452
3 Sheets
View all Metal Earth Models
Sort by
Item Number
  • Item Number
  • Newest to Oldest
  • Sheets: Low to High
  • Sheets: High to Low
  • Easiest to Expert
  • Expert to Easiest
Display
Item Number
  • 12
  • 24
  • 48
  • All

Wild West Stagecoach

MMS189
3 Sheets

Wild West Gatling Gun

MMS188
2.5 Sheets

Wild West Revolver

MMS187
2 Sheets

Excavator

MMS185
2 Sheets
Is a heavy construction equipment consisting of a boom, dipper, bucket and cab on a rotating platform known as the "house". The house sits atop an undercarriage with tracks or wheels. It is a natural progression from the steam shovel and often mistakenly called power shovel

Motor Grader

MMS184
3 Sheets
Also commonly referred to as road grader, is a construction machine with a long blade used to create a flat surface during the grading process

Wheel Loader

MMS183
2 Sheets
Is a heavy equipment machine used in construction to move aside or load materials such as asphalt, demolition debris, dirt, snow, gravel etc. onto other types of machinery

Mining Truck

MMS182
3 Sheets
Is an off-highway, rigid dump truck specifically engineered for use in high-production mining and heavy-duty construction environments.

Yomeimon Gate

MMS172
3.25 Sheets
Yomeimon Gate – Is part of the Tosho-gu Shrine in Kikko which is the mausoleum of Tokugawa Ieyasu, the founder of the Tokugawa shogunate. It is one of Japan's most ornate structures, giving off a grand and imposing air with its intricate decorations and architectural features

DeLorean

MMS181
2.5 Sheets
Was produced for the American market by The DeLorean Motor Company in Belfast, Northern Ireland from 1981 to 1983. This sleek angular car featured gull-wing doors and an unpainted brushed stainless steel body. It was immortalized as the DeLorean time machine in the Back to the Future movie franchise.